SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Wed, 13 Feb 2008 20:42:46 -0800
From:	Tom Brown <thomabrown@gmail.com >
Reply-To:	scoug-help@scoug.com
To:	scoug-help@scoug.com
Subject:	SCOUG-Help: Genmac, eCS 2.0 RC 4, & nForce 4 (10DE,0057) NIC

Content-Transfer-Encoding: 7bit

I have been experimenting with eCS 2.0 RC4 on my Tyan K8WE S2895 motherboard.
This is an SMP board with 2 Opterons and 2 GiB ram. RC4 will install, but the
network does NOT work. I selected the GenMac nForce 4 driver for the 10DE:0057
chipset. The network adapter configuration shows W10DEX0057_NIF. When it boots,
peer will not start.

I believe that PROTOCOL.INI is incorrect, but I don't have the knowledge to fix
it. LANTRAN.LOG & PROTOCOL.INI are attached. I think I need another line in the
[IBMLXCFG] section such as: W10DEX0057_nif = W10DEX0057.nif, but after adding
that, it still does not work.

Another item: This board has two NICs, but I only have one defined in MPTS. I
have tried booting with the cable connected to both RJ-45 jacks, same story.

Any suggestions?

Thanks!
--
Tom Brown, Catherder
thomabrown at gmail dot com
Member SCOUG, V.O.I.C.E., & SDAA

Unknown header: name="lantran.log" :
Unknown header: filename="lantran.log" :
File attachment: 602unknown

name="PROTOCOL.INI"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="PROTOCOL.INI"
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=====================================================

To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".

For problems, contact the list owner at
"postmaster@scoug.com".

=====================================================

Return to [ 13 | February | 2008 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.