SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Sun, 17 Sep 2006 19:01:21 -0700
From:	Martin Rosenfeld <rosenfeldmj@comcast.net >
Reply-To:	scoug-help@scoug.com
To:	scoug-help@scoug.com
Subject:	SCOUG-Help: Re: Networking

Content-Transfer-Encoding: 7bit

Steven,

There has been a bit of a hiatus in my networking efforts due to
unmentionable software problems which seem to have been straightened out
now.

> You have what would technically be called a TCP/IP based Intranet.

EXCUSE me!

> Note that it is possible to do file sharing with just TCP/IP protocols.
> It's called NFS, but it's not a good solution if you want to talk to
> Windows boxes too.

I do want either eCS computer to be able to talk to the other when it is
running Windows.

> config.sys
> protocol.ini
> ibmlan.ini (if you have one)

Attached.

> Are you going to want to have Windows boxes on the LAN? If so, what kind?
> XP? W2K?

One machine dual boots to WIN2K, the other to WINMe.

Martin

name="CONFIG.SYS"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="CONFIG.SYS"

REM [CONFIG.SYS]
REM [06/09/17 16:27:22]
REM [Sorted by cfgSort v5.0.4]
REM [Documentation: \ecs\doc\cfgsort\cfgsort.doc]

REM [1] Device Driver Statements
DEVICE=Q:\OS2\BOOT\UNICODE.SYS
DEVICE=Q:\OS2\LOG.SYS
IFS=Q:\OS2\JFS.IFS /LW:5,20,4 /AUTOCHECK:*
IFS=Q:\OS2\HPFS.IFS /CACHE:2048 /CRECL:4 /AUTOCHECK:*
IFS=Q:\ECS\BOOT\FAT32.IFS /CACHE:2048 /H /Q
IFS=Q:\OS2\BOOT\UDF.IFS /Q
IFS=Q:\OS2\BOOT\CDFS.IFS /Q /W
DEVICE=Q:\OS2\BOOT\OS2CDROM.DMD /Q
DEVICE=Q:\OS2\MDOS\VCDROM.SYS
DEVICE=Q:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=Q:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=Q:\IBMCOM\LANMSGDD.OS2 /I:Q:\IBMCOM /S
DEVICE=Q:\IBMCOM\PROTMAN.OS2 /I:Q:\IBMCOM
DEVICE=Q:\OS2\BOOT\TESTCFG.SYS
DEVICE=Q:\OS2\BOOT\DOS.SYS
DEVICE=Q:\OS2\BOOT\PMDD.SYS
DEVICE=Q:\OS2\MDOS\VEMM.SYS
DEVICE=Q:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=Q:\OS2\MDOS\VDPMI.SYS
DEVICE=Q:\OS2\MDOS\VDPX.SYS
DEVICE=Q:\OS2\MDOS\VWIN.SYS
DEVICE=Q:\OS2\MDOS\VW32S.SYS
DEVICE=Q:\OS2\MDOS\VMOUSE.SYS
DEVICE=Q:\OS2\BOOT\POINTDD.SYS
DEVICE=Q:\OS2\BOOT\MOUSE.SYS
DEVICE=Q:\OS2\BOOT\COM.SYS
DEVICE=Q:\OS2\MDOS\VCOM.SYS
DEVICE=Q:\OS2\BOOT\USBPRT.SYS
DEVICE=Q:\OS2\BOOT\USBMOUSE.SYS
DEVICE=Q:\OS2\BOOT\USBKBD.SYS
DEVICE=Q:\ECS\BOOT\usbresmg.sys
DEVICE=Q:\MPTN\PROTOCOL\SOCKETSK.SYS
DEVICE=Q:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=Q:\MPTN\PROTOCOL\AFINETK.SYS
DEVICE=Q:\MPTN\BIN\VDOSTCP.VDD
DEVICE=Q:\MPTN\PROTOCOL\AFNB.SYS
DEVICE=Q:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=Q:\IBMCOM\PROTOCOL\TCPBEUI.OS2
DEVICE=Q:\IBMLAN\NETPROG\RDRHELP.200
IFS=Q:\IBMLAN\NETPROG\NETWKSTA.200 /I:Q:\IBMLAN /N
DEVICE=Q:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=Q:\IBMCOM\MACS\B57.OS2
IFS=Q:\ecs\boot\ntfs.ifs /RO:*
DEVICE=Q:\OS2\MDOS\VSVGA.SYS
DEVICE=Q:\OS2\GRADD.SYS
DEVICE=Q:\OS2\MDOS\VMANWIN.SYS
DEVICE=Q:\OS2\SDDHELP.SYS /Q
DEVICE=Q:\IBMLAN\NETPROG\VNETAPI.OS2
DEVICE=Q:\TCPIP\bin\vdostcp.sys
DEVICE=Q:\MPTN\PROTOCOL\FWIP.SYS
DEVICE=Q:\MMOS2\ssmdd.sys /S:64 /P:64 /H:256 /Q:1024 /E:1024
DEVICE=Q:\MMOS2\r0stub.sys
DEVICE=Q:\MMOS2\MMPLAYER\midi.sys
DEVICE=Q:\MMOS2\vcshdd.sys
DEVICE=Q:\MMOS2\UNIAUD32.SYS /V
DEVICE=Q:\MMOS2\UNIAUD16.SYS /V /C

REM [2] Platform Specific Driver Statements
PSD=ACPI.PSD

REM [3] Base Device Driver Statements
BASEDEV=IBMKBD.SYS
BASEDEV=TIMER0.SYS
BASEDEV=PRINT01.SYS
BASEDEV=CHKDSK.SYS
BASEDEV=USBEHCD.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBD.SYS
BASEDEV=USBHID.SYS
BASEDEV=CADH.SYS
BASEDEV=ACPICA.ADD
BASEDEV=IBM1FLPY.ADD
BASEDEV=DANIS506.ADD
BASEDEV=TMSCSIW.ADD
BASEDEV=USBMSD.ADD
BASEDEV=DANIATAP.FLT
BASEDEV=OS2DASD.DMD
BASEDEV=OS2LVM.DMD

REM [4] Kernel Directive Statements
AUTOFAIL=YES
BREAK=OFF
BUFFERS=90
CLOCKSCALE=4
CODEPAGE=850,437
COUNTRY=001,Q:\OS2\SYSTEM\COUNTRY.SYS
DISKCACHE=1024,LW,32
DOS=LOW,NOUMB
FCBS=16,8
FILES=64
IOPL=YES
MAXWAIT=1
MEMMAN=SWAP,PROTECT
PRINTMONBUFSIZE=134,134,134
PRIORITY_DISK_IO=YES
PROTECTONLY=NO
PROTSHELL=Q:\OS2\PMSHELL.EXE
RESERVEDRIVELETTER=R
RMSIZE=640
SHELL=Q:\OS2\MDOS\COMMAND.COM Q:\OS2\MDOS
SUPPRESSPOPUPS=Q
THREADS=1024
VIRTUALADDRESSLIMIT=1536

REM [5] Environment Variable Statements
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS
SET C1=SDDGRADD
SET COMSPEC=Q:\OS2\CMD.EXE
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;F:\DELETE,512;G:\DELETE,512;H:\DELETE,512;I:\DELETE,512;J:\DELETE,512;K:\DELETE,512;M:\DELETE,512;N:\DELETE,512;O:\DELETE,512;Q:\DELETE,512;S:\DELETE,512;T:\DELETE,512;X:\DELETE,512;Z:\DELETE,512;
SET DEVICEFONTDISABLED=NO
SET DIRCMD=/V
SET DISPLAYTYPE=VGA
SET DLSINI=Q:\IBMLAN\NETPROG\NETGUI.INI
SET ENH_STRETCH=NO
SET ETC=Q:\MPTN\ETC
SET GLOSSARY=Q:\OS2\HELP\GLOSS;
SET GRADD_CHAINS=C1
SET GREEXT=SDDGREXT
SET HOME=Q:\HOME\DEFAULT
SET HOSTNAME=NELSON
SET IKEYMAN40_HOME=Q:\IBMGSK40
SET IKEYMAN50_HOME=Q:\IBMGSK50
SET IKEYMAN_HOME=Q:\IBMGSK
SET INIT_FILE_NAMES=netgui
SET INIT_FILE_RANGES=200
SET IPF_KEYS=SBCS
SET JAVA_HIGH_MEMORY=1
SET KEYS=ON
SET LANG=en_US
SET LANINSTEP=S:\cid\server\IBMLS
SET LOGFILES=Q:\var\log
SET MMBASE=Q:\MMOS2;
SET MMSTREAM=/S:64 /P:64 /H:256 /Q:1024 /E:1024
SET MMYIELD=10
SET MOZILLA_HOME=H:\VEE\PROFILE
SET NCDEBUG=4000
SET NOLARGENTEXEICON=1
SET OS2_SHELL=Q:\OS2\CMD.EXE
SET OS=ecs
SET OSDIR=Q:\ecs
SET PROGRAMS=Q:\PROGRAMS
SET PROMPT=[$p]
SET RESTARTOBJECTS=STARTUPFOLDERSONLY,REBOOTONLY
SET RUNWORKPLACE=Q:\OS2\PMSHELL.EXE
SET SANE_CONFIG_DIR=Q:\PROGRAMS\TAME\conf
SET SCCANBENUKED=ON
SET SCKILLFEATUREENABLED=ON
SET SHELLHANDLESINC=20
SET SOMDDIR=Q:\OS2\ETC\DSOM
SET SOMIR=Q:\OS2\ETC\SOM.IR;Q:\OS2\ETC\WPSH.IR;Q:\OS2\ETC\WPDSERV.IR;Q:\OS2\ETC\REXX.IR;
SET SWING_HOME=Q:\java11\Swing
SET SYSTEM_INI=Q:\OS2\OS2SYS.INI
SET TCPLANG=en_US
SET TEMP=Q:\var\temp
SET TIMESYNC=0
SET TMP=Q:\var\temp
SET TZ=PST8PDT,4,1,0,7200,10,-1,0,7200,3600
SET UNZIPOPT=-C
SET USER_INI=Q:\OS2\OS2.INI
SET USE_HOSTS_FIRST=1
SET VCFG_NO_DDC=TRUE
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
SET WARPIN_IFEXISTINGNEWER=OVERWRITE
SET WARPIN_IFEXISTINGOLDER=OVERWRITE
SET WARPIN_IFSAMEDATE=OVERWRITE
SET WPS_COMMUNICATION=YES

REM [6] Path Statements
LIBPATH=.;Q:\IBMLAN\NETLIB;Q:\MUGLIB\DLL;Q:\PROGRAMS\NETSCAPE\PROGRAM;Q:\ECS\DLL;Q:\ECS\INSTALL\WARPIN;Q:\OS2\DLL;Q:\IBMGSK50\LIB;Q:\IBMGSK40\LIB;Q:\IBMGSK\LIB;Q:\MPTN\DLL;Q:\TCPIP\DLL;Q:\IBMCOM\DLL;Q:\OS2\MDOS;Q:\;Q:\OS2\APPS\DLL;Q:\EMX\DLL;Q:\JAVA11\DLL;Q:\MMOS2\DLL;Q:\MMOS2\FREEDB;
SET PATH=Q:\IBMLAN\NETPROG;Q:\MUGLIB;Q:\PROGRAMS\NETSCAPE\PROGRAM;Q:\ECS\BIN;Q:\ECS\INSTALL\WARPIN;Q:\IBMGSK50\BIN;Q:\IBMGSK40\BIN;Q:\IBMGSK\BIN;Q:\MPTN\BIN;Q:\TCPIP\BIN;Q:\IBMCOM;Q:\OS2;Q:\OS2\SYSTEM;Q:\OS2\MDOS\WINOS2;Q:\OS2\INSTALL;Q:\;Q:\OS2\MDOS;Q:\OS2\APPS;Q:\EMX\BIN;Q:\JAVA11\BIN;Q:\MMOS2\FREEDB;Q:\MMOS2;Q:\MMOS2\MMPLAYER;
SET DPATH=Q:\IBMLAN\NETPROG;Q:\IBMLAN;Q:\MUGLIB;Q:\ECS\LANG;Q:\MPTN;Q:\IBMCOM;Q:\OS2;Q:\OS2\SYSTEM;Q:\OS2\MDOS\WINOS2;Q:\OS2\INSTALL;Q:\;Q:\OS2\BITMAP;Q:\OS2\MDOS;Q:\OS2\APPS;Q:\MMOS2;Q:\MMOS2\INSTALL;
SET HELP=Q:\ecs\help;Q:\MPTN;Q:\MPTN\HELP;Q:\OS2\HELP;Q:\ecs\system\ewps\help;Q:\IBMLAN\NETPROG;Q:\TCPIP\HELP;Q:\MMOS2\HELP;
SET ULSPATH=Q:\LANGUAGE
SWAPPATH=Q:\OS2\SYSTEM 2048 2048
SET BOOKSHELF=Q:\IBMLAN\NETPROG;Q:\OS2\BOOK;Q:\ecs\book;Q:\TCPIP\HELP;Q:\MMOS2;
SET EPMPATH=Q:\OS2\APPS;
SET NLSPATH=Q:\MPTN\MSG\NLS\%N;Q:\TCPIP\msg\ENUS850\%N;
SET MOZ_PLUGIN_PATH=Q:\PROGRAMS\MOZ_PLUG
SET DMIPATH=Q:\DMISL\BIN
SET CLASSPATH=Q:\JAVA11\LIB\SecMa.jar;Q:\java11\Swing\swingall.jar;Q:\java11\lib\classes.zip;.\.;Q:\OS2\JAVAAPPS\LVMGUI.ZIP;Q:\TCPIP\java;
SET NWDBPATH=Q:\IBMLAN\NETPROG
SET DSPPATH=Q:\MMOS2\DSP;

REM [7] Device Information Statements
DEVINFO=KBD,US103,Q:\OS2\KEYBOARD.DCP
DEVINFO=SCR,VGA,Q:\OS2\BOOT\VIOTBL.DCP

REM [8] Executable Statements
CALL=Q:\ECS\BIN\CACHEF32.EXE /S
RUN=Q:\OS2\EPW.EXE
RUN=Q:\OS2\SYSTEM\LVMALERT.EXE
RUN=Q:\OS2\EXTENDFS.EXE *
CALL=Q:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=Q:\IBMCOM\LANMSGEX.EXE
RUN=Q:\MPTN\BIN\AFNBINI.EXE
RUN=Q:\MPTN\BIN\CNTRL.EXE
CALL=Q:\OS2\CMD.EXE /Q /C Q:\MPTN\BIN\MPTSTART.CMD >NUL
RUN=Q:\IBMCOM\PROTOCOL\NBTCP.EXE
RUN=Q:\MPTN\BIN\VDOSCTL.EXE
RUN=Q:\ECS\SYSTEM\ECLOCK\CLKBASIC.EXE
RUN=Q:\OS2\SMSTART.EXE
RUN=Q:\IBMLAN\NETPROG\LSDAEMON.EXE
RUN=Q:\IBMLAN\NETPROG\VNRMINIT.EXE
RUN=Q:\OS2\SYSTEM\LOGDAEM.EXE
RUN=Q:\OS2\EPWROUT.EXE 1
RUN=Q:\MMOS2\mididmon.exe
RUN=Q:\MMOS2\mmhelpdd.exe
RUN=Q:\MMOS2\qrymmcd.exe

name="PROTOCOL.INI"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline;
filename="PROTOCOL.INI"

[PROT_MAN]

DRIVERNAME =3D PROTMAN$

[NETBEUI_NIF]

DriverName =3D netbeui$
BINDINGS =3D ,B57_NIF,,
ETHERAND_TYPE =3D "I"
USEADDRREV =3D "YES"
OS2TRACEMASK =3D 0x0
SESSIONS =3D 130
NCBS =3D 225
NAMES =3D 21
SELECTORS =3D 50
USEMAXDATAGRAM =3D "NO"
ADAPTRATE =3D 1000
WINDOWERRORS =3D 0
MAXDATARCV =3D 4168
TI =3D 30000
T1 =3D 1000
T2 =3D 200
MAXIN =3D 1
MAXOUT =3D 1
NETBIOSTIMEOUT =3D 500
NETBIOSRETRIES =3D 3
NAMECACHE =3D 1000
RNDOPTION =3D 1
PIGGYBACKACKS =3D 1
DATAGRAMPACKETS =3D 50
PACKETS =3D 300
LOOPPACKETS =3D 8
PIPELINE =3D 5
MAXTRANSMITS =3D 6
MINTRANSMITS =3D 2
DLCRETRIES =3D 10
FCPRIORITY =3D 5

[IBMLXCFG]

NETBEUI_NIF =3D netbeui.nif
TCPBEUI_NIF =3D tcpbeui.nif
TCPIP_NIF =3D tcpip.nif
B57_NIF =3D B57.NIF

[TCPBEUI_NIF]

DriverName =3D tcpbeui$
BINDINGS =3D B57_NIF,,,
NODETYPE =3D "B-Node"
OS2TRACEMASK =3D 0x0
SESSIONS =3D 130
NCBS =3D 225
NAMES =3D 21
SELECTORS =3D 15
USEMAXDATAGRAM =3D "NO"
NETBIOSTIMEOUT =3D 500
NETBIOSRETRIES =3D 2
NAMECACHE =3D 1000
PURGECACHE =3D 0
PRELOADCACHE =3D "NO"
NAMESFILE =3D 0
DATAGRAMPACKETS =3D 20
PACKETS =3D 50
ENABLEDNS =3D 0
INTERFACERATE =3D 300

[TCPIP_NIF]

DriverName =3D TCPIP$
BINDINGS =3D B57_NIF,,,

[B57_NIF]

DriverName =3D B57$

[NETBIOS]

DRIVERNAME =3D NETBIOS$
ADAPTER0 =3D TCPBEUI$,0
ADAPTER1 =3D NETBEUI$,1

=1A

name="IBMLAN.INI"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="IBMLAN.INI"

; OS/2 LAN Requester initialization file

[networks]

net1 = TCPBEUI$,0,LM10,34,100,14
net2 = NETBEUI$,1,LM10,34,100,14
; This information is read by the redirector at device initialization time.

[requester]

; The following parameters generally do not need to be
; changed by the user.
charcount = 16
chartime = 250
charwait = 3600
keepconn = 600
keepsearch = 600
maxcmds = 16
maxerrorlog = 100
maxthreads = 10
maxwrkcache = 64
numalerts = 12
numcharbuf = 10
numservices = 7
numworkbuf = 40
numdgrambuf = 14
othdomains =
printbuftime = 90
sesstimeout = 45
sizcharbuf = 512
sizerror = 1024
sizworkbuf = 4096
; The wrkheuristics parameter sets a variety of requester fine-tuning
; options. Brief descriptions are provided here for each digit. More
; complete descriptions, along with explanations of relationships between
; digits can be found in the LAN Server Network Administrator Reference
; Volume 2: Performance Tuning.
;
; When not otherwise specified, a value of 0 means off (inactive) and 1 means
; on (active).
;
; 0 opportunistic locking of files (default is 1)
; 1 performance optimization for batch (.CMD) files (default is 1)
; 2 asynchronous unlock and asynchronous write-unlock
; 0 = never 2 = only on a LAN Server virtual circuit
; 1 = always (default)
; 3 asynchronous close and asynchronous write-close
; 0 = never 2 = only on a LAN Server virtual circuit
; 1 = always (default)
; 4 buffer all named pipes and serial devices (default is 1)
; 5 combined read-lock and write-unlock
; 0 = never 2 = only on a LAN Server virtual circuit
; 1 = always (default)
; 6 open and read optimization (default is 1)
; 7 reserved
; 8 use of the chain-send NETBIOS NCB
; 0 = never
; 1 = when a server's buffer is larger than the workstations buffer
; 2 = always (default)
; 9 buffer small read and write requests until the buffer is full
; 0 = never 2 = only on a LAN Server virtual circuit
; 1 = always (default)
; 10 buffer mode
; 0 = always read buffer size amount of data if the request is smaller
; than the buffer size (sizworkbuf) and data is being read
; sequentially
; 1 = use full buffer if file is open for reading and writing
; 2 = use full buffer if reading and writing sequentially
; 3 = buffer all requests smaller than the buffer size (if hits occur)
; (default)
; 11 RAW read and RAW write SMB protocols (default is 1)
; 12 RAW read-ahead buffer (default is 1)
; 13 RAW write-behind buffer (default is 1)
; 14 read multiplexing SMB protocols (default is 1)
; 15 write multiplexing SMB protocols (default is 1)
; 16 use of big buffers for large core (non-RAW) reads (default is 1)
; 17 same-size read-ahead or read-to-sector boundary (default is 1)
; 18 same-size small record write-behind or write-to-sector boundary
; (default is 0)
; 19 reserved and must be 0
; 20 flush pipes and devices on a DosBufReset or DosClose operation
; 0 = Flush only files and devices opened by the caller. Spin until
; flushed. Wait for confirmation before processing with other
; tasks. (default)
; 1 = Flush only files and devices opened by the caller. Flush only
; once. Do not wait for confirmation.
; 2 = Flush all files and all input and output of short-term pipes
; and devices. Spin until flushed.
; 3 = Flush all files and all input and output of short-term pipes
; and devices. Flush only once.
; 4 = Flush all files and all input and output of all pipes and devices.
; Spin until flushed.
; 5 = Flush all files and all input and output of all pipes and devices.
; Flush only once.
; 21 LAN Server encryption of passwords (default is 1)
; 22 control log entries for multiple occurrences of an error
; 0 = log all occurrences (default)
; 1-9 = limit occurrences that are logged (1-9 define size of table
; that is used to track errors)
; 23 buffer all files opened with deny-write sharing mode (default is 1)
; 24 buffer all files opened with the read-only attribute set (default is 1)
; 25 read ahead when opening for execution (default is 1)
; 26 handle the interrupt (ctrl+c) key
; 0 = allow no interrupts
; 1 = allow interrupts only on long-term operations
; 2 = always allow interrupts (default)
; 27 force correct open mode when creating files on a core server (reserved
; for DBCS users) (default is 1)
; 28 NETBIOS NoAck mode
; 0 = NoAck is disabled.
; 1 = NoAck is set on send only. (default)
; 2 = NoAck is set on receive only.
; 3 = NoAck is set on send and receive.
; 29 send data along with SMB write-block RAW requests (default is 1)
; 30 send a message to the screen when the requester logs an error
; 0 = never
; 1 = on write-fault errors only (no time out) (default)
; 2 = on write-fault and internal errors only (no time out)
; 3 = on all errors (no time out)
; 4 = reserved
; 5 = on write-fault errors only (time out)
; 6 = on write-fault and internal errors only (time out)
; 7 = on all errors (time out)
; 8 = on all errors (time out) and pop up an error if a session
; to a server is abnormally disconnected
; 9 = on all errors (time out) and generate an INT24 (critical
; error) to applications running under DOS emulation if a
; network hard error is encountered
; 31 reserved
; 32 behavior of DosBufReset on a redirected file (not pipes or devices).
; When the call to the API returns, the data in the buffer has been
; handled as follows:
; 0 = Changed data in the buffer was sent from the requester to the
; server. The server has written the data to disk.
; 1 = Changed data in the buffer was sent from the requester to the
; server. The server has not yet written the data to disk.
; 2 = DosBufReset was ignored. (default)
; 33 time interval for performing logon validation from the domain
; controller
; 0 = 5 seconds 4 = 60 seconds 8 = 8 minutes
; 1 = 15 seconds (default) 5 = 90 seconds 9 = 15 minutes
; 2 = 30 seconds 6 = 2 minutes
; 3 = 45 seconds 7 = 4 minutes
; 34 date validation
; 0 = PCLP date format (default)
; 1 = MSNET date format
; 2 = assume date is correct
; 35 free disk space reported to DOS and Windows applications
; 0 = return true value (default)
; 1 = return a value less than two gigabytes
; 36 time and date synchronization with the domain controller at logon
; (default is 1)
; 37 type of verification for the LAN Server logon
; 0 = no verification
; 1 = verify against local NET.ACC
; 2 = verify against domain NET.ACC (default)
; 38 display warning messages for the LAN Server logon
; 0 = do not display warning messages
; 1 = display all warning messages (default)
; 2 = do not display LAN Server specific warning messages
; 3 = display all warning messages, including password expiration date
; 39 buffer all files opened in compatibility mode
; 0 = buffer only files opened for read access in compatibility mode
; 1 = buffer all files opened in compatibility mode (default)
; 40 allow a user to logon multiple times in the same domain (default is 1)
;
; The next lines help you to locate bits in the wrkheuristics entry.
; 1 2 3 4
; 0123456789012345678901234567890123456789012
wrkheuristics = 1111111121311111110001011120111221001111100
wrkservices = MESSENGER, peer
wrknets = NET1,NET2
Computername = NELSON
Domain = IBMPEERS

[messenger]

logfile = messages.log
sizmessbuf = 4096

[peer]

auditing = resource
; The following parameters generally do not need to be
; changed by the user. NOTE : srvnets= is represented in
; the server info struct as a 16-bit lan mask. Srvnet names
; are converted to indexes within [networks] for the named nets.
guestacct = guest
autodisconnect = -1
maxauditlog = 100
maxchdevjob = 2
maxchdevs = 1
maxconnections = 26
maxlocks = 64
maxopens = 160
maxsearches = 150
maxsessopens = 80
maxsessreqs = 25
maxsessvcs = 1
maxshares = 16
maxusers = 5
numbigbuf = 4
numfiletasks = 1
numreqbuf = 48
sizreqbuf = 4096
srvhidden = no
; The srvheuristics parameter sets a variety of server fine-tuning
; options. Brief descriptions are provided here for each digit. More
; complete descriptions, along with explanations of relationships between
; digits can be found in the LAN Server Network Administrator Reference
; Volume 2: Performance Tuning.
;
; When not otherwise specified, a value of 0 means off (inactive) and 1 means
; on (active).
;
; 0 opportunistic locking of files (default is 1)
; 1 read-ahead when the requester is performing sequential access
; 0 = do not use read-ahead
; 1 = use single read-ahead thread (default)
; 2 = use asynchronous read-ahead thread
; 2 write-behind (default is 1)
; 3 use of the chain-send NETBIOS NCB (default is 1)
; 4 check all incoming SMBs for correct format (default is 0)
; 5 support FCB opens (default is 1)
; 6 set priority of server (default is 4)
; 0-9 = 0 is highest priority, 9 is lowest priority
; 7 automatically allocate additional memory for directory searches
; (default is 1)
; 8 write records to the audit log only when the scavenger wakes up
; (default is 1)
; 9 do full buffering when a file is opened with deny-write sharing mode
; (default is 1)
; 10 set the interval for the scavenger to wake up
; 0 = 5 seconds 4 = 25 seconds 8 = 45 seconds
; 1 = 10 seconds (default) 5 = 30 seconds 9 = 50 seconds
; 2 = 15 seconds 6 = 35 seconds
; 3 = 20 seconds 7 = 40 seconds
; 11 allow compatibility-mode opens of certain types of files by translating
; them to sharing mode opens with deny-none
; 0 = Always use compatibility-mode opens.
; 1 = Use deny-none sharing mode if read-only access to .EXE or .COM
; files.
; 2 = Use deny-none sharing mode if read-only access to .EXE or .COM
; files. Use deny-write sharing mode if read-only access to .BAT
; files is requested.
; 3 = Use deny-none sharing mode on all compatibility-mode opens.
; (default)
; 12 allow DOS LAN Services workstations to use a second NETBIOS session when
; sending printer requests (default is 1)
; 13 number of 64KB buffers used for read-ahead
; 0-9 = number of buffers (default is 1)
; 14 convert incoming path specifications into most basic format (default is 0)
; 15 Oplock Timeout and NETBIOS Acknowledgment Timeout (default is 0)
; 0 = 35 second Oplock Timeout; 34 second NETBIOS Acknowledgment Timeout
; 1 = 70 second Oplock Timeout; 69 second NETBIOS Acknowledgment Timeout
; 2 = 140 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 3 = 210 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 4 = 280 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 5 = 350 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 6 = 420 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 7 = 490 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 8 = 560 second Oplock Timeout; 127 second NETBIOS Acknowledgment Timeout
; 9 = 640 second Oplock Timeout; no NETBIOS Acknowledgment Timeout
; 16 validate IOCTLs (default is 1)
; 17 how long the server maintains unused, dynamic big buffers before freeing
; the memory.
; 0 = 0 seconds 4 = 5 minutes 8 = 1 hour
; 1 = 1 second 5 = 10 minutes 9 = indefinitely
; 2 = 10 seconds 6 = 20 minutes
; 3 = 1 minute (default) 7 = 40 minutes
; 18 how long the server waits after failing to allocate a big buffer before
; trying again.
; 0 = 0 seconds 3 = 1 minute (default)
; 1 = 1 second 4 = 5 minutes
; 2 = 10 seconds 5 = 10 minutes
; 19 RAW read and RAW write SMB protocols (default is 1)
; 20 server responds to announcement requests (default is 1)
;
; The next lines help you to locate bits in the srvheuristics entry.
; 1 2
; 012345678901234567890
srvheuristics = 111101411113110013311
SRVSERVICES =
srvnets = NET1,NET2

SRVCOMMENT =
[replicator]

replicate = IMPORT
importpath = Q:\ibmlan\repl\import
tryuser = yes
password =

[services]

; Correlates name of service to pathname of service program.
; The pathname must be either
; 1) an absolute path (including the drive specification)
; OR
; 2) a path relative to the IBMLAN root
messenger = services\msrvinit.exe
peer = services\peerinit.exe
replicator = services\replicat.exe
requester = services\wksta.exe

Return to [ 17 | September | 2006 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.