SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Sat, 7 Aug 2004 15:47:18 PDT7
From:	Michael Rakijas <mrakijas@oco.net >
Reply-To:	scoug-help@scoug.com
To:	scoug-help <scoug-help@scoug.com >
Subject:	SCOUG-Help: Adding SCSI after the install

=====================================================
If you are responding to someone asking for help who
may not be a member of this list, be sure to use the
REPLY TO ALL feature of your email program.
=====================================================

I'm struggling with getting eCS 1.1 on a machine. Actually, that's not exactly
true. I intended to have a couple of SCSI CD's on it, one ROM and the other RW.
Because the SCSI adapter is not part of the small repertoire supported during
install, I temporarily put in an IDE CDROM to get the OS installed which went
OK. Only, I can't get the SCSI CD's added later. I went through the addition
of the driver of the card and it seems to add fine - only, the OS doesn't seem
to see the drives or even the driver. I verified the target hardware (Tekram
DC315 with Yamaha drives) by temporarily plugging in another IDE hard drive,
installing DOS and installing the DOS drivers. It works fine there so hardware,
terminations are all fine. The OS/2 version added the BASEDEV=TRM3X5.ADD device
but it doesn't appear in the hardware manager. I tried an Adaptec 2920A (the
BASEDEV=AHA2920.ADD device at the bottom of the CONFIG.SYS) and its BIOS
displays itself and recognizes the drives but does not appear in the hardware
manager and the CDs don't appear to the OS. At boot time, in all conditions, I
get the error: "C:\OS2\BOOT\OS2CDROM.DMD specified in the DEVICE statement on
line 48 of the CONFIG.SYS file was not installed. Line xx is ignored - Press
Enter to continue".

I thought I was missing the BASEDEV=OS2SCSI.DMD so I tried adding that in
various locations of the CONFIG.SYS and I got no different results. Anyone have
any ideas? Thanks in advance.

-Rocky

DEVICE=C:\OS2\LOG.SYS
device=C:\os2\boot\excphead.sys
device=C:\os2\boot\unicode.sys
REM IFS=C:\eCS\boot\ntfs.ifs /CACHE:4096
IFS=C:\OS2\JFS.IFS /LW:5,20,4 /AUTOCHECK:* /CACHE:4096
IFS=C:\OS2\HPFS.IFS /CACHE:2048 /CRECL:4 /AUTOCHECK:C
IFS=C:\OS2\BOOT\UDF.IFS
IFS=C:\OS2\BOOT\CDFS.IFS /Q /W
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\PROGRAMS\BROWSER;C:\IBMLAN\NETLIB;C:\MUGLIB\DLL;C:\PROGRAMS\NETSCAPE\PROGRAM;C:\ecs\dll;.;C:\OS2\DLL;C:\IBMGSK50\LIB;C:\IBMGSK40\LIB;C:\IBMGSK\LIB;C:\MPTN\DLL;C:\TCPIP\DLL;C:\IBMCOM\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\emx\dll;C:\PrtUtils\markvis;C:\JAVA131\JRE\DLL;C:\JAVA11\DLL;C:\MMOS2\DLL;
SET
PATH=C:\PROGRAMS\BROWSER;C:\IBMLAN\NETPROG;C:\MUGLIB;C:\PROGRAMS\NETSCAPE\PROGRAM;C:\ecs\bin;C:\IBMGSK50\BIN;C:\IBMGSK40\BIN;C:\IBMGSK\BIN;C:\MPTN\BIN;C:\TCPIP\BIN;C:\IBMCOM;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;C:\emx\bin;C:\JAVA131\JRE\BIN;C:\JAVA11\BIN;C:\MMOS2;
SET
DPATH=C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\ecs\lang;C:\MPTN\BIN;C:\MPTN;C:\IBMCOM;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;
SET PROMPT=[$p]
SET RESTARTOBJECTS=STARTUPFOLDERSONLY,REBOOTONLY
SET OS=ecs
SET OSDIR=C:\ecs
SET TMP=C:\var\temp
SET TEMP=C:\var\temp
SET TMPDIR=C:\var\temp
SET LOGFILES=C:\var\log
SET PROGRAMS=C:\programs
SET HOME=C:\home\default
SET UNZIPOPT=-C
AUTOFAIL=YES
SUPPRESSPOPUPS=C
SET DIRCMD=/O:GN/V
SET SHELLHANDLESINC=32
SET NOLARGENTEXEICON=1
VIRTUALADDRESSLIMIT=2048
SET TIMESYNC=0
SET SDDFONTSIZE=MEDIUM
SET SCKILLFEATUREENABLED=ON
SET ENH_STRETCH=NO
SET
HELP=C:\ecs\help;C:\MPTN;C:\MPTN\HELP;C:\OS2\HELP;C:\PrtUtils\markvis;C:\IBMLAN\NETPROG;C:\TCPIP\HELP;C:\MMOS2\HELP;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=64
RESERVEDRIVELETTER=R
BASEDEV=IBMKBD.SYS
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM /S
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
CODEPAGE=850,437
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
SET LANG=en_US
REM *** The TZ string is maintained by eCS Clock. Do not change manually!
Please refer to the clock's manual. ***
SET TZ=PST8PDT,4,1,0,7200,10,-1,0,7200,3600
SET ULSPATH=C:\LANGUAGE
BUFFERS=90
IOPL=YES
DISKCACHE=1024,LW,32
MAXWAIT=1
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=1024
PRINTMONBUFSIZE=134,134,134
SET KEYS=ON
SET
BOOKSHELF=C:\IBMLAN\NETPROG;C:\ecs\book;C:\OS2\BOOK;C:\emx\book;C:\TCPIP\HELP;C:\MMOS2;
SET
SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR;C:\OS2\ETC\REXX.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
BASEDEV=TIMER0.SYS
RUN=C:\OS2\EPW.EXE
RUN=C:\OS2\SYSTEM\LVMALERT.EXE
RUN=C:\OS2\EXTENDFS.EXE *
REM SET
DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;S:\DELETE,512;Z:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
REM BASEDEV=IBM2FLPY.ADD
BASEDEV=DANIS506.ADD
REM BASEDEV=I2OXPORT.SYS
REM BASEDEV=I2OSOSM.ADD
BASEDEV=OS2DASD.DMD
BASEDEV=OS2LVM.DMD
BASEDEV=CHKDSK.SYS
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VW32S.SYS
DEVICE=C:\OS2\BOOT\APM.SYS
DEVICE=C:\OS2\MDOS\VAPM.SYS
RUN=C:\OS2\APMDAEMN.EXE
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS
REM DEVICE=C:\OS2\BOOT\COM.SYS
REM DEVICE=C:\OS2\MDOS\VCOM.SYS
SET DEVICEFONTDISABLED=NO
REM BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBUHCD.SYS
BASEDEV=USBD.SYS
BASEDEV=USBHID.SYS
BASEDEV=USBMSD.ADD
REM BASEDEV=USBCDROM.ADD
DEVICE=C:\OS2\BOOT\USBKBD.SYS
DEVICE=C:\OS2\BOOT\USBMOUSE.SYS
REM DEVICE=C:\OS2\BOOT\USBCOM.SYS
DEVICE=C:\OS2\BOOT\USBPRT.SYS
DEVICE=C:\OS2\BOOT\USBRESMG.SYS
SET DISPLAYTYPE=VGA
CALL=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
SET NLSPATH=C:\MPTN\MSG\NLS\%N;C:\TCPIP\msg\ENUS850\%N;
SET ETC=C:\MPTN\ETC
DEVICE=C:\MPTN\PROTOCOL\SOCKETSK.SYS
DEVICE=C:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=C:\MPTN\PROTOCOL\AFINETK.SYS
DEVICE=C:\MPTN\BIN\VDOSTCP.VDD
RUN=C:\MPTN\BIN\AFNBINI.EXE
DEVICE=C:\MPTN\PROTOCOL\AFNB.SYS
RUN=C:\MPTN\BIN\CNTRL.EXE
CALL=C:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD >NUL
RUN=C:\IBMCOM\PROTOCOL\NBTCP.EXE
RUN=C:\MPTN\BIN\VDOSCTL.EXE
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMCOM\PROTOCOL\TCPBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\IBMCOM\MACS\RTSND.OS2
SET IKEYMAN_HOME=C:\IBMGSK
SET IKEYMAN40_HOME=C:\IBMGSK40
SET IKEYMAN50_HOME=C:\IBMGSK50
BASEDEV=DANIATAP.FLT
SET JAVA_HIGH_MEMORY=1
CLOCKSCALE=4
RUN=C:\ECS\SYSTEM\ECLOCK\CLKBASIC.EXE
REM Begin SIOECS
REM Un-rem next line if you experience traps in SIO2K.SYS when shutting down
via Ctrl-Alt-Del
REM DEVICE=C:\eCS\boot\unbhsio.sys
DEVICE=C:\eCS\system\SIOeCS\UART.SYS LOGFILE=C:\var\log\SIOeCS\SIO2K.log
DEVICE=C:\eCS\system\SIOeCS\VSIO2K.SYS LOGFILE=C:\var\log\SIOeCS\SIO2K.log
DEVICE=C:\eCS\system\SIOeCS\SIO2K.SYS LOGFILE=C:\var\log\SIOeCS\SIO2K.log
REM End SIOECS
SET DMIPATH=C:\DMISL\BIN
RUN=C:\OS2\SMSTART.EXE
SET
CLASSPATH=C:\JAVA11\LIB\SecMa.jar;C:\java11\Swing\swingall.jar;C:\java11\lib\classes.zip;.\.;C:\OS2\JAVAAPPS\LVMGUI.ZIP;C:\TCPIP\java;
SET SWING_HOME=C:\java11\Swing
RUN=C:\IBMLAN\NETPROG\LSDAEMON.EXE
DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2
RUN=C:\IBMLAN\NETPROG\VNRMINIT.EXE
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE
RUN=C:\OS2\EPWROUT.EXE 1
SET NWDBPATH=C:\IBMLAN\NETPROG
SET DLSINI=C:\IBMLAN\NETPROG\NETGUI.INI
SET INIT_FILE_NAMES=netgui
SET INIT_FILE_RANGES=200
SET WPS_COMMUNICATION=YES
SET LANINSTEP=S:\cid\server\ibmls
SET MOZILLA_HOME=C:\home\default
SET TCPLANG=en_US
DEVICE=C:\TCPIP\bin\vdostcp.sys
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
SET GRADD_CHAINS=C1
DEVICE=C:\OS2\GRADD.SYS
DEVICE=C:\OS2\MDOS\VMANWIN.SYS
SET VCFG_NO_DDC=TRUE
SET C1=SDDGRADD
DEVICE=C:\OS2\SDDHELP.SYS
SET USE_HOSTS_FIRST=1
SET HOSTNAME = MyComputer
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
RUN=C:\MMOS2\MIDIDMON.EXE
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
DEVICE=C:\MMOS2\MIDI.SYS
DEVICE=C:\MMOS2\VCSHDD.SYS
RUN=C:\MMOS2\QRYMMCD.EXE
BASEDEV=AHA2920.ADD
BASEDEV=TRM3X5.ADD
DEVICE=C:\MMOS2\CT5880.SYS /N:CT58801$ /O:NoHWTimer

=====================================================

To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".

For problems, contact the list owner at
"rollin@scoug.com".

=====================================================

Return to [ 07 | August | 2004 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.